Hardwood Insulated External Door Sets

Our Hardwood Insulated External Door Sets (QTE 7 & QTE 8 Town & Country Classic Range) offer a warm and welcoming entrance to your home combined with high performance, security and energy efficiency.

The range represents quality manufactured hardwood entrance doors with a choice of designs to suit your specific project needs. 

Our products are fully factory finished to ensure long term performance and appearance. 

Hardwood Insulated External Door Sets

Energy Efficient, Secure and Sustainable

Click on the titles below to reveal more information.

QTE 7 & QTE 8 Town & Country Classics - Single

Our QTE 7 Town Classics are panelled internally & externally.

Our QTE 8 Country Classics are lined & grooved externally and panelled internally.

These products can be supplied as single or double doors. They can also be manufactured to oversize standards and selected designs can achieve a fire rating of FD30

The robustness of these products means they are also suitable for use as Common Entrance doors. Where electronic locking & release is required, these can be supplied as Automated for Assistance.

These doors can be supplied with accompanying sidelights, fanlights and screens. Products can be amended to perform to specific requirements.

Refer to 'Notes' for further details.

Designs with multi-glazing units (7.10G, 7.16G, 7.17G, 7.18G, 7.20G, 7.22G, 8.7G, 8.8G, 8.9G, 8.15G ) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass. Timber astragals complete with back-to-back spacer are available on request at an additional cost.

QTE 7.1 QTE 7.1 QTE 7.2G QTE 7.2G QTE 7.3G QTE 7.3G QTE 7.4G QTE 7.4G QTE 7.5 QTE 7.5 QTE 7.6G QTE 7.6G QTE 7.8G QTE 7.8G QTE 7.10G QTE 7.10G QTE 7.11G QTE 7.11G QTE 7.12G QTE 7.12G QTE 7.14G QTE 7.14G QTE 7.15G QTE 7.15G QTE 7.16G QTE 7.16G QTE 7.17G QTE 7.17G QTE 7.18G QTE 7.18G QTE 7.19G QTE 7.19G QTE 7.20G QTE 7.20G QTE 7.21G QTE 7.21G QTE 7.22G QTE 7.22G QTE 7.23G QTE 7.23G QTE 7.24G QTE 7.24G QTE 7.25G QTE 7.25G QTE 8.1G QTE 8.1G QTE 8.2G QTE 8.2G QTE 8.3G QTE 8.3G QTE 8.4G QTE 8.4G QTE 8.5G QTE 8.5G QTE 8.6G QTE 8.6G QTE 8.7G QTE 8.7G QTE 8.8G QTE 8.8G QTE 8.9G QTE 8.9G QTE 8.10G QTE 8.10G QTE 8.11 QTE 8.11 QTE 8.12G QTE 8.12G QTE 8.14G QTE 8.14G QTE 8.15G QTE 8.15G
  • U-Value to 1.1 W/m2K
  • 58mm Hardwood insulated composite door with PIR insulation*
  • UNIQUE Insulated Mortise & Tenon jointed doors**
  • Hung in a 80x57mm Hardwood Laminated Frame manufactured from the solid. Incorporating:
    a) a continuous all round Aquamac 21 weather gasket
    b) adjustable metal security keeps                                 
  • High Security 3 point locking system to DIN 18103
  • Kitemarked anti-bump Euro Profile Cylinder with 3 keys
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • Handle with integral escutcheon back plate
  • Low level cill in or out open
  • Laminated/toughened clear or obscure double glazed units
  • Fully Factory Finished using Standard or RAL/BS colours
  • Sidelights & Fanlights can be included as part of an integral unit.
* The PIR insulation achieves an A+ rating under the BRE Green Guide. It is manufactured without the use of CFC or HCFC. It has Zero Ozone Depletion Potential and a GWP of <5.
** The combination of insulation and mortise and tenon is unique to Russell Timber Technology. It is a traditional and strong method of jointing two pieces of timber together to withstand the ravages of life long usage.
 

Our product range can be supplied fully factory finished from a selection of stains and colours.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. All single door designs can be manufactured as inward or outward opening French or Double Doors including fully glazed products. They incorporate an alternative High Security Fullex Gemini locking system specifically developed for French or Double Doors.
  2. All single door designs can be supplied as Automated for Assistance where automated locks for locking and/or release are required for the elderly or frail. A 12v motor and power supply unit together with 2m of transition cable and appropriate lock are supplied usage dependent.
  3. Many of the designs within the range can be manufactured as an FD30 fire rated product - useful in deck access locations. Contact our Technical Department for further details.
  4. The QTE 7 and QTE 8 ranges are also appropriate as Access Control doors for apartment properties using an Anti-thrust Night Latch with heavy duty electric latch, pull handle and push plate.
  5. Most single door designs can be used as Common Entrance Doors to multi-usage buildings for extra security. Supplied with deeper frame section it incorporates a substantial magnetic lock/locks plus a concealed Dorma ITS96 door closer, D handle, kick plates etc...
  6. Our windows and doors are tested to Secured by Design.
  7. Our complete range uses timber from managed forests with Full Chain of Custody.
  8. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets.

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

QTE 7 Town Classics - Panelled both sides
Product Code: 7si (insulated SINGLE doors)
 
QTE 8 Country Classics - Lined and grooved externally
Product Code: 8si (insulated SINGLE  doors)
 

Designs with multi-glazing units (7.10G, 7.16G, 7.17G, 7.18G, 7.20G, 7.22G ) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass. Timber astragals complete with back-to-back spacer are available on request at an additional cost. Call us for details.

Back to top

QTE 7 & QTE 8 Town & Country Classics - Double

Double or French Door Sets come in many guises to optimise light whilst retaining warmth and security. 

Most of our external insulated door set designs can be offered as both inward or outward opening. 

For peace of mind this product range incorporates a Gemini 5 point locking system. It is also certified to Secured by Design and can achieve U-Values of 1.1 W/m2k or better, glass dependent.

While all QTE 7 and QTE 8 doors can be manufactured as double doors, below are the most popular styles.

QTE 7.11Gf QTE 7.11Gf QTE 7.12Gf QTE 7.12Gf QTE 7.19Gf QTE 7.19Gf QTE 7.23Gf QTE 7.23Gf QTE 7.24Gf QTE 7.24Gf QTE 7.25Gf QTE 7.25Gf QTE 8.3Gf QTE 8.3Gf QTE 8.6Gf QTE 8.6Gf
  • U-Value to 1.1 W/m2K
  • 58mm Hardwood insulated composite door with PIR insulation*
  • UNIQUE Insulated Mortise & Tenon jointed doors**
  • Hung in a 80x57mm Hardwood Laminated Frame manufactured from the solid. Incorporating: a continuous all round Aquamac 21 weather gasket                              
  • High Security French Door Fullex Gemini Locking System
  • Kitemarked anti-bump Euro Profile Cylinder with 3 keys
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • Handle with integral escutcheon back plate
  • Low level cill in or out open
  • Laminated/toughened clear or obscure double glazed units
  • Fully Factory Finished using Standard or RAL/BS colours
  • Sidelights & Fanlights can be included as part of an integral unit.
* The PIR insulation achieves an A+ rating under the BRE Green Guide. It is manufactured without the use of CFC or HCFC. It has Zero Ozone Depletion Potential and a GWP of <5.
** The combination of insulation and mortise and tenon is unique to Russell Timber Technology. It is a traditional and strong method of jointing two pieces of timber together to withstand the ravages of life long usage.

Our product range can be supplied fully factory finished from a selection of stains and colours.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. All single door designs can be manufactured as inward or outward opening French or Double Doors including fully glazed products. They incorporate an alternative High Security Fullex Gemini locking system specifically developed for French or Double Doors.
  2. All single door designs can be supplied as Automated for Assistance where automated locks for locking and/or release are required for the elderly or frail. A 12v motor and power supply unit together with 2m of transition cable and appropriate lock are supplied usage dependent.
  3. Many of the designs within the range can be manufactured as an FD30 fire rated product - useful in deck access locations. Contact our Technical Department for further details.
  4. The QTE 7 and QTE 8 ranges are also appropriate as Access Control doors for apartment properties using an Anti-thrust Night Latch with heavy duty electric latch, pull handle and push plate.
  5. Most single door designs can be used as Common Entrance Doors to multi-usage buildings for extra security. Supplied with deeper frame section it incorporates a substantial magnetic lock/locks plus a concealed Dorma ITS96 door closer, D handle, kick plates etc...
  6. Our windows and doors are tested to Secured by Design.
  7. Our complete range uses timber from managed forests with Full Chain of Custody.
  8. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets.

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

QTE 7 Town Classics - Panelled both sides
Product Code: 7di (insulated DOUBLE doors)

QTE 8 Country Classics - Lined and grooved externally
Product Code: 8di (insulated DOUBLE doors)

Designs with multi-glazing units (7.10G, 7.16G, 7.17G, 7.18G, 7.20G, 7.22G ) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass. Timber astragals complete with back-to-back spacer are available on request at an additional cost. Call us for details.

Back to top

QTE 7 & QTE 8 Common Entrance Doors - Magna Lock

Our high performance Magna Lock Access Doors are stylish and practical.

This range is extremely robust and secure ideal for heavy-usage buildings. Supplied with deeper frame section it incorporates a substantial magnetic lock/locks plus a concealed Dorma ITS96 door closer, D handle, kick plates etc...

Single or Double magnets can be used as can glazing specification be varied depending on location.

These doors can be supplied with accompanying sidelights, fanlights and screens.

Appropriate handles, kick plates, concealed door closers are supplied. 

Products can be amended to perform to specific requirements.

Designs with multi-glazing units (7.10G, 7.16G, 7.17G, 7.18G, 7.20G, 7.22G, 8.7G, 8.8G, 8.9G, 8.15G ) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass. Timber astragals complete with back-to-back spacer are available on request at an additional cost.

Portcullis Design options available

QTE 7.2G QTE 7.2G QTE 7.4G QTE 7.4G QTE 7.6G QTE 7.6G QTE 7.11G QTE 7.11G QTE 7.12G QTE 7.12G QTE 7.19G QTE 7.19G QTE 8.3G QTE 8.3G QTE 8.5G QTE 8.5G QTE 8.6G QTE 8.6G
  • U-Value to 1.1 W/m2K
  • 58mm Hardwood insulated composite door with PIR insulation*
  • UNIQUE Insulated Mortise & Tenon jointed doors**
  • Hung in a 120mm Hardwood Laminated Frame manufactured from the solid. Incorporating:
  • a) a continuous Aquamac 21 draught strip
  • b) 1200lb Magna Lock
  • c) Dorma ITS96 Concealed Door                                
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • Standard effect 'D' Handles with Push Plates
  • Kick plates internal and external
  • Low level cill in or out open
  • Laminated/toughened clear or obscure double glazed units
  • Fully Factory Finished using Standard or RAL/BS colours
  • Sidelights & Fanlights can be included as part of an integral unit.
  • Sidelights can be constructed to house the access control equipment or post box banks
* The PIR insulation achieves an A+ rating under the BRE Green Guide. It is manufactured without the use of CFC or HCFC. It has Zero Ozone Depletion Potential and a GWP of <5.
** The combination of insulation and mortise and tenon is unique to Russell Timber Technology. It is a traditional and strong method of jointing two pieces of timber together to withstand the ravages of life long usage.

Our product range can be supplied fully factory finished from a selection of stains and colours.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. All single door designs can be manufactured as inward or outward opening French or Double Doors including fully glazed products. They incorporate an alternative High Security Fullex Gemini locking system specifically developed for French or Double Doors.
  2. All single door designs can be supplied as Automated for Assistance where automated locks for locking and/or release are required for the elderly or frail. A 12v motor and power supply unit together with 2m of transition cable and appropriate lock are supplied usage dependent.
  3. Many of the designs within the range can be manufactured as an FD30 fire rated product - useful in deck access locations. Contact our Technical Department for further details.
  4. The QTE 7 and QTE 8 ranges are also appropriate as Access Control doors for apartment properties using an Anti-thrust Night Latch with heavy duty electric latch, pull handle and push plate.
  5. Most single door designs can be used as Common Entrance Doors to multi-usage buildings for extra security. Supplied with deeper frame section it incorporates a substantial magnetic lock/locks plus a concealed Dorma ITS96 door closer, D handle, kick plates etc...
  6. Our windows and doors are tested to Secured by Design.
  7. Our complete range uses timber from managed forests with Full Chain of Custody.
  8. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets.

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

QTE 7 Town Classics - Panelled both sides
Product Code: 7sm (Single MAGNA LOCK)
 
QTE 8 Country Classics - Lined and grooved externally
Product Code: 8sm (Single MAGNA LOCK)
 
Designs with multi-glazing units (8.7G, 8.8G, 8.9G, & 8.15G) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass. Timber astragals complete with back-to-back spacer are available on request at an additional cost. Call us for details.
Back to top

QTE 7 & QTE 8 Common Entrance Doors - Electric Strike

Commonly used in sheltered housing & low usage environments

The electronically controlled latch offers safe security yet releases instantly should there be power failure or fire in the building.

Designs with multi-glazing units (7.10G, 7.16G, 7.17G, 7.18G, 7.20G, 7.22G, 8.7G, 8.8G, 8.9G, 8.15G ) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass. Timber astragals complete with back-to-back spacer are available on request at an additional cost.

Portcullis Design options available

QTE 7.1 QTE 7.1 QTE 7.2G QTE 7.2G QTE 7.3G QTE 7.3G QTE 7.4G QTE 7.4G QTE 7.5 QTE 7.5 QTE 7.6G QTE 7.6G QTE 7.8G QTE 7.8G QTE 7.10G QTE 7.10G QTE 7.11G QTE 7.11G QTE 7.12G QTE 7.12G QTE 7.14G QTE 7.14G QTE 7.15G QTE 7.15G QTE 7.16G QTE 7.16G QTE 7.18G QTE 7.18G QTE 7.17G QTE 7.17G QTE 7.19G QTE 7.19G QTE 7.20G QTE 7.20G QTE 7.21G QTE 7.21G QTE 7.22G QTE 7.22G QTE 7.23G QTE 7.23G QTE 7.24G QTE 7.24G QTE 7.25G QTE 7.25G QTE 8.1G QTE 8.1G QTE 8.2G QTE 8.2G QTE 8.3G QTE 8.3G QTE 8.4G QTE 8.4G QTE 8.5G QTE 8.5G QTE 8.6G QTE 8.6G QTE 8.7G QTE 8.7G QTE 8.8G QTE 8.8G QTE 8.9G QTE 8.9G QTE 8.10G QTE 8.10G QTE 8.11 QTE 8.11 QTE 8.12G QTE 8.12G QTE 8.14G QTE 8.14G QTE 8.15G QTE 8.15G
  • U-Value to 1.1 W/m2K
  • 58mm Hardwood insulated composite door with PIR insulation*
  • UNIQUE Insulated Mortise & Tenon jointed doors**
  • Hung in a 80x57mm Hardwood Laminated Frame manufactured from the solid. Incorporating a continuous Aquamac 21 weather gasket
  • Anti-Thrust Night Latch with Heavy Duty Electric Latch
  • Kitemarked anti-bump Euro Profile Cylinder with 3 keys                         
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • 9" Pull handle & Push Plate
  • Standard Lever handles internally
  • Low level cill in or out open
  • Laminated/toughened clear or obscure double glazed units
  • Fully Factory Finished using Standard or RAL/BS colours
  • Sidelights & Fanlights can be included as part of an integral unit.
  • Sidelights can be constructed to house the access control equipment or post box banks
* The PIR insulation achieves an A+ rating under the BRE Green Guide. It is manufactured without the use of CFC or HCFC. It has Zero Ozone Depletion Potential and a GWP of <5.
** The combination of insulation and mortise and tenon is unique to Russell Timber Technology. It is a traditional and strong method of jointing two pieces of timber together to withstand the ravages of life long usage.

Our product range can be supplied fully factory finished from a selection of stains and colours.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. All single door designs can be manufactured as inward or outward opening French or Double Doors including fully glazed products. They incorporate an alternative High Security Fullex Gemini locking system specifically developed for French or Double Doors.
  2. All single door designs can be supplied as Automated for Assistance where automated locks for locking and/or release are required for the elderly or frail. A 12v motor and power supply unit together with 2m of transition cable and appropriate lock are supplied usage dependent.
  3. Many of the designs within the range can be manufactured as an FD30 fire rated product - useful in deck access locations. Contact our Technical Department for further details.
  4. The QTE 7 and QTE 8 ranges are also appropriate as Access Control doors for apartment properties using an Anti-thrust Night Latch with heavy duty electric latch, pull handle and push plate.
  5. Most single door designs can be used as Common Entrance Doors to multi-usage buildings for extra security. Supplied with deeper frame section it incorporates a substantial magnetic lock/locks plus a concealed Dorma ITS96 door closer, D handle, kick plates etc...
  6. Our windows and doors are tested to Secured by Design.
  7. Our complete range uses timber from managed forests with Full Chain of Custody.
  8. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets.

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

QTE 7 Town Classics - Panelled both sides
Product Code: 7sl (single latch)

QTE 8 Country Classics - Lined and grooved externally
Product Code: 8sl (single latch)

Designs with multi-glazing units (8.7G, 8.8G, 8.9G, & 8.15G) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass. Timber astragals complete with back-to-back spacer are available on request at an additional cost. Call us for details.
 

Back to top

QTE 7 & QTE 8 Automated for Assistance - Auto Multi Locks AV2 & AV2E

Our range of Automated for Assistance door sets are particularly suited to buildings with lower density occupation or where automated locks for locking and/or release are required for the frail, elderly or other circumstances.

Our range include a slam lock feature, and all single doors can be supplied as Automated for Assistance.

A 12v motor and power supply unit together with 2m of transition cable and appropriate locks are supplied, usage dependent.

Designs with multi-glazing units (7.10G, 7.16G, 7.17G, 7.18G, 7.20G, 7.22G, 8.7G, 8.8G, 8.9G, 8.15G ) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass. Timber astragals complete with back-to-back spacer are available on request at an additional cost.

QTE 7.1 QTE 7.1 QTE 7.2G QTE 7.2G QTE 7.3G QTE 7.3G QTE 7.4G QTE 7.4G QTE 7.5 QTE 7.5 QTE 7.6G QTE 7.6G QTE 7.8G QTE 7.8G QTE 7.10G QTE 7.10G QTE 7.11G QTE 7.11G QTE 7.12G QTE 7.12G QTE 7.14G QTE 7.14G QTE 7.15G QTE 7.15G QTE 7.16G QTE 7.16G QTE 7.17G QTE 7.17G QTE 7.18G QTE 7.18G QTE 7.19G QTE 7.19G QTE 7.20G QTE 7.20G QTE 7.21G QTE 7.21G QTE 7.22G QTE 7.22G QTE 7.23G QTE 7.23G QTE 7.24G QTE 7.24G QTE 7.25G QTE 7.25G QTE 8.1G QTE 8.1G QTE 8.2G QTE 8.2G QTE 8.3G QTE 8.3G QTE 8.4G QTE 8.4G QTE 8.5G QTE 8.5G QTE 8.6G QTE 8.6G QTE 8.7G QTE 8.7G QTE 8.8G QTE 8.8G QTE 8.9G QTE 8.9G QTE 8.10G QTE 8.10G QTE 8.11 QTE 8.11 QTE 8.12G QTE 8.12G QTE 8.14G QTE 8.14G QTE 8.15G QTE 8.15G
  • U-Value to 1.1 W/m2K
  • 58mm Hardwood insulated composite door with PIR insulation*
  • UNIQUE Insulated Mortise & Tenon jointed doors**
  • Hung in a 80x57mm Hardwood Laminated Frame manufactured from the solid. Incorporating:
  • a) a continuous Aquamac 21 weather gasket
  • b) Adjustable metal security keeps
  • High Security AV2 or AV2E - 2 hooks and latch
  • Additions when using AV2E:
  • 12v motor & power supply unit
  • Cable transition with 2m of cable
  • Kitemarked anti-bump Euro Profile Cylinder with 3 keys                         
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • Handle with integral escutcheon back plate
  • Low level cill in or out open
  • Laminated/toughened clear or obscure double glazed units
  • Fully Factory Finished using Standard or RAL/BS colours
  • Sidelights & Fanlights can be included as part of an integral unit.
* The PIR insulation achieves an A+ rating under the BRE Green Guide. It is manufactured without the use of CFC or HCFC. It has Zero Ozone Depletion Potential and a GWP of <5.
** The combination of insulation and mortise and tenon is unique to Russell Timber Technology. It is a traditional and strong method of jointing two pieces of timber together to withstand the ravages of life long usage.

Our product range can be supplied fully factory finished from a selection of stains and colours.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. All single door designs can be manufactured as inward or outward opening French or Double Doors including fully glazed products. They incorporate an alternative High Security Fullex Gemini locking system specifically developed for French or Double Doors.
  2. All single door designs can be supplied as Automated for Assistance where automated locks for locking and/or release are required for the elderly or frail. A 12v motor and power supply unit together with 2m of transition cable and appropriate lock are supplied usage dependent.
  3. Many of the designs within the range can be manufactured as an FD30 fire rated product - useful in deck access locations. Contact our Technical Department for further details.
  4. The QTE 7 and QTE 8 ranges are also appropriate as Access Control doors for apartment properties using an Anti-thrust Night Latch with heavy duty electric latch, pull handle and push plate.
  5. Most single door designs can be used as Common Entrance Doors to multi-usage buildings for extra security. Supplied with deeper frame section it incorporates a substantial magnetic lock/locks plus a concealed Dorma ITS96 door closer, D handle, kick plates etc...
  6. Our windows and doors are tested to Secured by Design.
  7. Our complete range uses timber from managed forests with Full Chain of Custody.
  8. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets.

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

QTE 7 Town Classics - Panelled both sides
Product Code: 7a (AV2)

QTE 8 Country Classics - Lined and grooved externally
Product Code: 8a (AV2E)

Designs with multi-glazing units (8.7G, 8.8G, 8.9G, & 8.15G) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass. Timber astragals complete with back-to-back spacer are available on request at an additional cost. Call us for details.

Back to top