Hardwood Timber Door Sets - FD30

Particularly suited to apartments where security and fire resistance are essential in internal situations. High rise, low rise, maisonettes or deck access.

Ease of lock operation allows instant release in an emergency. Tested to Secured by Design.

Certified by Fire Laboratories and approved by Fire Authorities - our doors are tried and tested.

The product range has also passed a BRE simulated arson test.

Our complete range uses timber from managed forests with Full Chain of Custody

Hardwood Timber Door Sets - FD30

Safe & Secure

Click on the titles below to reveal more information.

QTE 2 FD30 Flat Entrance Door Sets

Particularly suited to apartments where security and fire resistance are essential in internal situations. High rise, low rise, maisonettes or deck access.

Ease of lock operation allows instant release in an emergency.

Certified by Fire Laboratories and approved by Fire Authorities - our doors are tried and tested. The product range has also passed a BRE simulated arson test.

This Secured by Design product range is offered in attractive veneers or with moulded facings for paint or stain finish.

Designs with multi-glazing units (QTE 2.9) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.

QTE 2.0 QTE 2.0 QTE 2.1 QTE 2.1 QTE 2.2 QTE 2.2 QTE 2.3 QTE 2.3 QTE 2.4 QTE 2.4 QTE 2.5 QTE 2.5 QTE 2.6G QTE 2.6G QTE 2.7G QTE 2.7G QTE 2.8G QTE 2.8G QTE 2.9G QTE 2.9G
  • 44mm Solid Hardwood Timber Core Door - Tested to BS476 Part 8. 
  • Hung in a 57x80mm Laminated Hardwood Frame manufactured from the solid. Incorporating:
    a) a continuous intumescent smoke seal with draught strip
    b) metal security keeps.
  • High Security 3 point locking system to DIN 18103.
  • Kitemarked anti-bump Euro Profile Cylinder with 3 keys
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • Handle with integral escutcheon back plate
  • Low level cill in or out open
  • Fully Factory Finished using Standard or RAL/BS Colours
  • Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

Our product range can be supplied fully factory finished from a selection of stains and colours.

Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. Designs with multi-glazing units are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.
  2. Veneered doors come with a white frame as standard
  3. Our windows and doors are tested to Secured by Designs
  4. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets
  5. All QTE 2 door sets can be manufactured to over size dimensions - call us for further details
  6. Our complete range uses timber from managed forests with Full Chain of Custody

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

Product Code: 2s3 (single 30min)
Door Codes: QTE 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7G, 2.8G, 2.9G

Back to top

QTE 2 FD30 Pass Door Sets

Within corridors and communal areas there is a Building Control requirement for Pass Door sets with or without side screens. These are offered as a passageway swing door with a push plate and pull handle and can be finished to the required appearance.

QTE 2 styles are designed to suit.

  • Passageway swing door with a push plate and pull handle
  • 44mm Solid Hardwood Timber Core Door - Tested to BS476 Part 8. 
  • Hung in a 57x80mm Laminated Hardwood Frame manufactured from the solid. Incorporating a continuous intumescent smoke seal with draught strip.
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • Standard Push Plates & Pull Handle
  • 7mm pyroshield
  • Fully Factory Finished using Standard or RAL/BS Colours
  • Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

Our product range can be supplied fully factory finished from a selection of stains and colours.

Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. Designs with multi-glazing units are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.
  2. Veneered doors come with a white frame as standard
  3. Our windows and doors are tested to Secured by Designs
  4. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets
  5. All QTE 2 door sets can be manufactured to over size dimensions - call us for further details
  6. Our complete range uses timber from managed forests with Full Chain of Custody

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

Product Code: 2p3 (pass 30min)
Door Code: QTE 2 – Designed to suit

Back to top

QTE 2 FD30 Flat Entrance Door Sets - Automated for Assistance

Where door sets are required for Automated Assistance (ie where automated locks for locking and/or release are required for the frail, elderly or other circumstances) all door designs can be offered.

A 12v motor and power supply unit together with 2m of transition cable and appropriate locks are supplied, usage dependent.

Designs with multi-glazing units (QTE 2.9) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.

QTE 2.0 QTE 2.0 QTE 2.1 QTE 2.1 QTE 2.2 QTE 2.2 QTE 2.3 QTE 2.3 QTE 2.4 QTE 2.4 QTE 2.5 QTE 2.5 QTE 2.6G QTE 2.6G QTE 2.7G QTE 2.7G QTE 2.8G QTE 2.8G QTE 2.9G QTE 2.9G
  • 44mm Solid Hardwood Timber Core Door - Tested to BS476 Part 8. 
  • Hung in a 57x80mm Laminated Hardwood Frame manufactured from the solid. Incorporating:
    a) a continuous intumescent smoke seal with draught strip​
    b) metal security keeps.
  • High Security AV2 or AV2e – 2 hooks & Latch
  • Additions when using AV2-e
  • 12v motor & power supply unit.
  • Cable Transition cable with 2m of cable
  • Kitemarked anti-bump Euro Profile Cylinder with 3 keys
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • Handle with integral escutcheon back plate
  • Low level cill in or out open
  • Fully Factory Finished using Standard or RAL/BS Colours
  • Veneers available include – Oak, Ash, Beech, Walnut. Others available on request

Our product range can be supplied fully factory finished from a selection of stains and colours.

Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. Designs with multi-glazing units are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.
  2. Veneered doors come with a white frame as standard
  3. Our windows and doors are tested to Secured by Designs
  4. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets
  5. All QTE 2 door sets can be manufactured to over size dimensions - call us for further details
  6. Our complete range uses timber from managed forests with Full Chain of Custody

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

Product Code: 2a3 (AV2 30min)
Door Codes: QTE 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7G, 2.8G, 2.9G

Back to top

QTE 7/8 FD30

Energy efficient and fire rated, this composite traditional mortise and tenon door set also achieved FD30 with certain designs.

Primarily used in deck access or conservation flatted and balcony areas where weather as well as fire are a consideration.

Designs with multi-glazing units are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.

QTE 7.5 QTE 7.5 QTE 7.6G QTE 7.6G QTE 7.11G QTE 7.11G QTE 7.12G QTE 7.12G QTE 7.14G QTE 7.14G QTE 7.15G QTE 7.15G QTE 7.16G QTE 7.16G QTE 7.19G QTE 7.19G QTE 7.21G QTE 7.21G QTE 8.1G QTE 8.1G QTE 8.2G QTE 8.2G QTE 8.3G QTE 8.3G QTE 8.4G QTE 8.4G QTE 8.5G QTE 8.5G QTE 8.6G QTE 8.6G QTE 8.10G QTE 8.10G QTE 8.11 QTE 8.11 QTE 8.14G QTE 8.14G
  • High performance fire rated door sets
  • 58mm Hardwood composite door
  • UNIQUE Composite Mortise & Tenon jointed doors**
  • Hung in a 80x57mm Hardwood Laminated Frame manufactured from the solid. Incorporating:
    a) a continuous all-round intumescent smoke seal with draught strip
    b) Adjustable metal security keeps.
  • Fire Rated to BS 476 Part 22 with appropriate door                             
  • High Security 3 point locking system to DIN 18103.
  • Kitemarked anti-bump Euro Profile Cylinder with 3 keys – Thumb Turn
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • Handle with integral escutcheon back plate
  • Low level cill* in or out open
  • Fully Factory Finished using Standard or RAL/BS Colours

** The combination of insulation and mortise and tenon is unique to Russell Timber Technology. It is a traditional and strong method of jointing two pieces of timber together to withstand the ravages of life long usage.

Our product range can be supplied fully factory finished from a selection of stains and colours.

Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. Designs with multi-glazing units are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.
  2. Veneered doors come with a white frame as standard
  3. Our windows and doors are tested to Secured by Designs
  4. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets
  5. All QTE 2 door sets can be manufactured to over size dimensions - call us for further details
  6. Our complete range uses timber from managed forests with Full Chain of Custody

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

Product Code: 7sf (Single Fire)
Door Codes: 7.5, 7.6G, 7.11G, 7.12G, 7.14G, 7.15G, 7.16G, 7.19G, 7.21G

QTE 7 Range: Doors are Panelled both sides

Product Code: 8sf (Single Fire)
Door Codes: QTE 8.1L, 8.2L, 8.3L, 8.4L, 8.5L, 8.6L, 8.10L, 8.11L, 8.14L

QTE 8 Range: Doors have Tongue & Grooved lining boards externally with Panelling  internally

Back to top

QTE 7/8 FD30 Pass Door - No Lock

Suitable for internal corridors and communal spaces and stair wells in flatted conservation buildings. This passageway swing door supplied with push plate and pull handle is often supplied with accompanying fire screens to match.

Designs with multi-glazing units are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.

QTE 7.5 QTE 7.5 QTE 7.6G QTE 7.6G QTE 7.11G QTE 7.11G QTE 7.12G QTE 7.12G QTE 7.14G QTE 7.14G QTE 7.15G QTE 7.15G QTE 7.16G QTE 7.16G QTE 7.19G QTE 7.19G QTE 7.21G QTE 7.21G QTE 8.1G QTE 8.1G QTE 8.2G QTE 8.2G QTE 8.3G QTE 8.3G QTE 8.4G QTE 8.4G QTE 8.5G QTE 8.5G QTE 8.6G QTE 8.6G QTE 8.10G QTE 8.10G QTE 8.11 QTE 8.11 QTE 8.14G QTE 8.14G
  • High performance fire rated door sets
  • 58mm Hardwood composite door
  • UNIQUE Composite  Mortise & Tenon jointed doors**
  • Hung in a 80x57mm Hardwood Laminated Frame manufactured from the solid. Incorporating a continuous all-round intumescent smoke seal with draught strip
  • Fire Rated to BS 476 Part 22 with appropriate door                             
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • Standard Push Plates & Pull Handle
  • 7mm pyroshield
  • Fully Factory Finished using Standard or RAL/BS Colours

** The combination of insulation and mortise and tenon is unique to Russell Timber Technology. It is a traditional and strong method of jointing two pieces of timber together to withstand the ravages of life long usage.

Our product range can be supplied fully factory finished from a selection of stains and colours.

Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. Designs with multi-glazing units are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.
  2. Veneered doors come with a white frame as standard
  3. Our windows and doors are tested to Secured by Designs
  4. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets
  5. All QTE 2 door sets can be manufactured to over size dimensions - call us for further details
  6. Our complete range uses timber from managed forests with Full Chain of Custody

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

Product Code: 7p (pass)
Door Codes: 7.5, 7.6G, 7.11G, 7.12G, 7.14G, 7.15G, 7.16G, 7.19G, 7.21G

QTE 7 Range: Doors are Panelled both sides

Product Code: 8p (pass)
Door Codes: QTE 8.1L, 8.2L, 8.3L, 8.4L, 8.5L, 8.6L, 8.10L, 8.11L, 8.14L

QTE 8 Range: Doors have Tongue & Grooved lining boards externally with Panelling  internally

Back to top