Hardwood Timber Door Sets - FD60

Door Sets with a fire rating of 60 minutes are often specified for offices, nursing homes, public buildings and particular areas in flatted properties as required by Building Control.

Certified by Fire laboratories and approved by Fire Authorities - our doors are tried and tested. The product range has also passed a BRE simulated arson test.

Ease of lock operation allows instant release in an emergency. Tested to Secured by Design.

Our complete range uses timber from managed forests with Full Chain of Custody.

Our FD60 doors can be supplied with glazed units. Contact our Technical department for details.

Hardwood Timber Door Sets - FD60

Safe & Secure

Click on the titles below to reveal more information.

QTE 2 FD60 Flat Entrance Door Sets

Often specified for offices, nursing homes, public buildings and particular areas in flatted properties as required by Building Control

Ease of lock operation allows instant release in an emergency.

Certified by Fire Laboratories and approved by Fire Authorities - our doors are tried and tested. The product range has also passed a BRE simulated arson test.

This Secured by Design product range is offered in attractive veneers or with moulded facings for paint or stain finish.

Our FD60 doors can be supplied with glazed units. Contact our Technical department for details.

QTE 2.0 QTE 2.0 QTE 2.1 QTE 2.1 QTE 2.2 QTE 2.2 QTE 2.3 QTE 2.3 QTE 2.4 QTE 2.4 QTE 2.5 QTE 2.5
  • 54mm Solid Hardwood Timber Core Door - Tested to BS476 Part 8. 
  • Hung in a 58x91mm Hardwood Frame manufactured from the solid. Incorporating:
    a) a continuous intumescent smoke seal with draught strip
  • b) metal security keeps.
  • High Security 3 point locking system to DIN 18103.
  • Kitemarked anti-bump Euro Profile Cylinder with 3 keys
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • Handle with integral escutcheon back plate
  • FD60 Hardwood Cill
  • Fully Factory Finished using Standard or RAL/BS colours
  • Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

Our product range can be supplied fully factory finished from a selection of stains and colours.

Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. Designs with multi-glazing units (QTE 2.9) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.
  2. Veneered doors come with a white frame as standard.
  3. Our windows and doors are tested to Secured by Design.
  4. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets.
  5. All QTE 2 door sets can be manufactured to over size dimensions - call us for further details
  6. Our complete range uses timber from managed forests with Full Chain of Custody.

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

Product Code: 2s6 (single 60min)
Door Codes: QTE 2.1, 2.2, 2.3, 2.4, 2.5.

Back to top

QTE 2 FD60 Pass Door Sets

Within corridors and communal areas there is a building requirement for Pass Door sets with our without side screen. These are offered as a passageway swing door with a push plate and pull handle and can be finished to the required appearance.

  • Passageway swing door with a push plate and pull handle
  • 54mm Solid Hardwood Timber Core Door - Tested to BS476 Part 8. 
  • Hung in a 58x91mm Laminated Hardwood Frame manufactured from the solid. Incorporating a continuous intumescent smoke seal with draught strip
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges Standard Push Plates & Pull Handle
  • 7mm pyroshield
  • Fully Factory Finished using Standard or RAL/BS Colours
  • Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

Our product range can be supplied fully factory finished from a selection of stains and colours.

Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. Designs with multi-glazing units (QTE 2.9) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.
  2. Veneered doors come with a white frame as standard.
  3. Our windows and doors are tested to Secured by Design.
  4. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets.
  5. All QTE 2 door sets can be manufactured to over size dimensions - call us for further details
  6. Our complete range uses timber from managed forests with Full Chain of Custody.

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

Product Code: 2p6 (pass 60min)
Door Codes: QTE2 – Designed to suit

Back to top

QTE 2 FD60 Flat Entrance Door Sets - Automated for Assistance

Where door sets are required for Automated Assistance (ie where automated locks for locking and/or release are required for the frail, elderly or other circumstances) all door designs can be offered.

A 12v motor and power supply unit together with 2m of transition cable and appropriate locks are supplied, usage dependent.

Our FD60 doors can be supplied with glazed units. Contact our Technical department for details.

QTE 2.0 QTE 2.0 QTE 2.1 QTE 2.1 QTE 2.2 QTE 2.2 QTE 2.3 QTE 2.3 QTE 2.4 QTE 2.4 QTE 2.5 QTE 2.5
  • 54mm Solid Hardwood Timber Core Door - Tested to BS476 Part 8. 
  • Hung in a 58x91mm Hardwood Frame manufactured from the solid. Incorporating:
    a) a continuous intumescent smoke seal with draught strip
    b) metal security keeps.
  • High Security AV2 or AV2e – 2 hooks & Latch
  • Additions when using AV2-e
  • 12v motor & power supply unit.
  • Cable Transition cable with 2m of cable
  • Kitemarked anti-bump Euro Profile Cylinder with 3 keys
  • 1½ pairs of Heavy Duty Hi-load Lift Off Hinges
  • Handle with integral escutcheon back plate
  • FD60 Hardwood Cill
  • Fully Factory Finished using Standard or RAL/BS Colours
  • Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

Our product range can be supplied fully factory finished from a selection of stains and colours.

Veneers available include – Oak, Ash, Beech, Walnut. Others available on request.

The colours shown are for illustration only. Please check RAL/BS numbers. Other RAL/BS colours can be supplied, which dependant on quantity, may attract an additional charge.

Teak Stain Mahogany NCS 8010-Y90R Midnight Blue BS 20C40 Oxford Blue BS 20D45 Pine Green RAL 6028 Steel Grey RAL 7011 Light Oak Stain White NSC S0502Y Wine Red RAL 3003
  1. Designs with multi-glazing units (QTE 2.9) are quoted with bronze glazing bars within the glass except products finished in white, which will have white glazing bars within the glass.
  2. Veneered doors come with a white frame as standard.
  3. Our windows and doors are tested to Secured by Design.
  4. To comply with 'Secured by Design', a spy-hole is required if opaque glazing units are used in front door sets.
  5. All QTE 2 door sets can be manufactured to over size dimensions - call us for further details
  6. Our complete range uses timber from managed forests with Full Chain of Custody.

All products and production are subject to continuous development. The company reserves the right to amend details and sizes without notice

Product Code: 2a6 (AV2 60min)
Door Code: QTE 2.1, 2.2, 2.3, 2.4, 2.5.

Back to top